Noe Builders
Alkyona · Monemvasia

Wardrobes &
desk combinations

Home ↗

The complete Alkyona furniture collection, with every design shown once and assigned to its houses below.

Interactive 3D models, finished dimensions and manufacturing notes in English.

Design 01
Rev H · Finished dimensions

1.1 · Bespoke wardrobeOpposite the bathroom

Bespoke wardrobe with left shelving, a right hanging section and framed cane sliding doors.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H2000 × 600 × 2000 mm
Furniture body · W × D × H2000 × 600 × 2000 mm
Fitted overall · W × D × H2100 × 600 × 2000 mm
Interior and components
Clear hanging height1100 mm
Lower storageTwo drawers with a fixed cover; no loose shelf below the rail
Upper storageEnlarged compartment above the clothes rail
FrontsTwo framed cane sliding leaves with closed side returns
PlinthFront and side closures finish flush with the body
ArrangementShelving on the left, hanging section on the right
Fitting and supplied material
Visible side connections50 mm finished width at each wall side. The 3D shows the trimmed pieces.
Supplied wall connectionsOne 100 mm allowance per side, trimmed to suit the finished opening.
Supplied overall width2200 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionConfirmed dimensions from Rev H, 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 02
Rev H · Finished dimensions

Standard wardrobe · 1200 mm1.2 / 1.5 / 1.6 / 2.3 / 2.4 · Second bedroom; 1.7 · Main bedroom

Freestanding wardrobe with framed cane sliding doors, upper storage and two lower drawers.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H1200 × 600 × 2000 mm
Furniture body · W × D × H1200 × 600 × 2000 mm
Fitted overall · W × D × H1200 × 600 × 2000 mm
Interior and components
Clear hanging height1100 mm
Lower storageTwo drawers with a fixed cover; no loose shelf below the rail
Upper storageEnlarged compartment above the clothes rail
FrontsTwo framed cane sliding leaves with closed side returns
PlinthFront and side closures finish flush with the body
Quantity and locations6 pieces: 1.2, 1.5, 1.6, 1.7, 2.3 and 2.4
Fitting and supplied material
Wall connectionsNone. This wardrobe is freestanding.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionConfirmed dimensions from Rev H, 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 03
Rev H · Finished dimensions

1.7 · Compact wardrobe · 1000 mmSecond bedroom

Compact wardrobe with framed cane sliding doors and neatly fitted side connections.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H1000 × 600 × 1950 mm
Furniture body · W × D × H1000 × 600 × 1950 mm
Fitted overall · W × D × H1100 × 600 × 1950 mm
Interior and components
Clear hanging height1100 mm
Lower storageTwo drawers with a fixed cover; no loose shelf below the rail
Upper storageEnlarged compartment above the clothes rail
FrontsTwo framed cane sliding leaves with closed side returns
PlinthFront and side closures finish flush with the body
Fitting and supplied material
Visible side connections50 mm finished width at each wall side. The 3D shows the trimmed pieces.
Supplied wall connectionsOne 100 mm allowance per side, trimmed to suit the finished opening.
Supplied overall width1200 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionConfirmed dimensions from Rev H, 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 04
Rev H · Finished dimensions

1.3 · Minibar combinationMain bedroom

Desk and wardrobe with a choice of two cabinet modules or a shorter arrangement with one cabinet module.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H3090 × 705 × 1920 mm
Furniture body · W × D × H4590 × 705 × 1920 mm
Fitted overall · W × D × H4640 × 705 × 2000 mm
Desktop · W × D × worktop height1500 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1500 × 300 × 25 mm
Shelf underside above floor1480 mm
Interior and components
Clear hanging height1100 mm above the structural bottom
Hanging sectionOne central clothes rail and an upper shelf; no loose lower shelf
Cabinet arrangementWardrobe + shelf module + minibar module
Desk storageThree drawers; pedestal on four adjustable feet
FrontsFour framed cane sliding leaves
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width4995 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia80 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionRev H, with the owner-confirmed removal of the desk pedestal end filler on 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 05
Rev H · Finished dimensions

1.4 · Minibar combinationMain bedroom

Desk and wardrobe with a choice of two cabinet modules or a shorter arrangement with one cabinet module.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H2990 × 705 × 1940 mm
Furniture body · W × D × H4490 × 705 × 1940 mm
Fitted overall · W × D × H4540 × 705 × 2000 mm
Desktop · W × D × worktop height1500 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1500 × 300 × 25 mm
Shelf underside above floor1480 mm
Interior and components
Clear hanging height1100 mm above the structural bottom
Hanging sectionOne central clothes rail and an upper shelf; no loose lower shelf
Cabinet arrangementWardrobe + shelf module + minibar module
Desk storageThree drawers; pedestal on four adjustable feet
FrontsFour framed cane sliding leaves
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width4895 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia60 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionRev H, with the owner-confirmed removal of the desk pedestal end filler on 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 06
Rev H · Finished dimensions

2.3 · Built-in wardrobeMain bedroom

Framed cane sliding doors, a central hanging section, shelving and two outer drawers.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H2290 × 678 × 1825 mm
Furniture body · W × D × H2290 × 678 × 1825 mm
Fitted overall · W × D × H2390 × 708 × 1875 mm
Interior and components
Clear hanging height1071 mm
Lower right compartment700 mm clear height below the shelf
Lower storageOpen central compartment; one operable drawer at each outer side
Structural top carrier40 mm, included in the cabinet height
Bare carcass height1785 mm
Fitting and supplied material
Visible side connections50 mm finished width at each wall side. The 3D shows the trimmed pieces.
Supplied wall connectionsOne 100 mm allowance per side, trimmed to suit the finished opening.
Supplied overall width2490 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia90 mm finished visible height
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionConfirmed dimensions from Rev H, 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 07
Rev H · Finished dimensions

2.4 · Built-in wardrobeMain bedroom

Framed cane sliding doors, a central hanging section, shelving and two outer drawers.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H2215 × 678 × 1710 mm
Furniture body · W × D × H2215 × 678 × 1710 mm
Fitted overall · W × D × H2315 × 708 × 1760 mm
Interior and components
Clear hanging height944 mm
Lower right compartment700 mm clear height below the shelf
Lower storageOpen central compartment; one operable drawer at each outer side
Structural top carrier40 mm, included in the cabinet height
Bare carcass height1670 mm
Rear concrete step135 mm projection from the back wall
Fitting and supplied material
Visible side connections50 mm finished width at each wall side. The 3D shows the trimmed pieces.
Supplied wall connectionsOne 100 mm allowance per side, trimmed to suit the finished opening.
Supplied overall width2415 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia90 mm finished visible height
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionConfirmed dimensions from Rev H, 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 08
Rev H · Finished dimensions

2.1 · Desk and storageMain bedroom

Desk on the right, floating wall shelf, wardrobe and adjacent shelving with matching timber fronts.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H1310 × 680 × 2025 mm
Furniture body · W × D × H2750 × 730 × 2025 mm
Fitted overall · W × D × H2800 × 730 × 2075 mm
Desktop · W × D × worktop height1440 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1440 × 300 × 25 mm
Shelf underside above floor1450 mm
Interior and components
Clear hanging height1100 mm
ArrangementWardrobe left; shelves next to the desk on the right
Wall shelfFloating board without visible vertical support boards
Desk storageThree drawers; pedestal on four adjustable feet
FrontsTwo hinged timber doors; 90° opening
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width3215 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia50 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionRev H, with the owner-confirmed removal of the desk pedestal end filler on 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 09
Planning · Not yet modelled

2.2 · Desk and storageMain bedroom

Desk on the right, floating wall shelf, wardrobe and adjacent shelving with matching timber fronts.

Dimensions & manufacturing notes

Finished dimensions
Width
2800 mm
Height
2175 mm
Total depth
730 mm
Cabinet · W × D × H1330 × 680 × 2125 mm
Furniture body · W × D × H2750 × 730 × 2125 mm
Fitted overall · W × D × H2800 × 730 × 2175 mm
Desktop · W × D × worktop height1420 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1420 × 300 × 25 mm
Shelf underside above floor1450 mm
Interior and components
Clear hanging height1100 mm
ArrangementWardrobe left; shelves next to the desk on the right
Wall shelfFloating board without visible vertical support boards
Desk storageThree drawers; pedestal on four adjustable feet
FrontsTwo hinged timber doors; 90° opening
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width3235 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia50 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
Planning basisPlanning basis supplied for House 2.2: the customer recorded an opening of 2900 × 2200 mm excluding plasterboard and floor tiles. The planned finished opening is 2850 × 2175 mm; the furniture body is 100 mm narrower and 50 mm lower. With the single wardrobe-side filler, the listed fitted width is 2800 mm; no pedestal-side filler is included.
RevisionPlanning entry requested on 28 September 2026; dimensions from the supplied House 2.2 brief.
ModelNot yet modelled for this collection. No 3D model or renderings are shown.
StatusWebsite presentation is not approval for manufacture.
Design 10
Rev H · Finished dimensions

2.5 · Desk and storageMain bedroom

Desk on the right, floating wall shelf, wardrobe and adjacent shelving with matching timber fronts.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H1500 × 680 × 2005 mm
Furniture body · W × D × H3205 × 730 × 2005 mm
Fitted overall · W × D × H3255 × 730 × 2055 mm
Desktop · W × D × worktop height1705 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1705 × 300 × 25 mm
Shelf underside above floor1450 mm
Interior and components
Clear hanging height1100 mm
ArrangementWardrobe left; shelves next to the desk on the right
Wall shelfFloating board without visible vertical support boards
Desk storageThree drawers; pedestal on four adjustable feet
FrontsTwo hinged timber doors; 90° opening
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width3405 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia50 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionRev H, with the owner-confirmed removal of the desk pedestal end filler on 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.
Design 11
Rev H · Finished dimensions

2.6 · Desk and storageMain bedroom

Desk on the right, floating wall shelf, wardrobe and adjacent shelving with matching timber fronts.

Dimensions & manufacturing notes

Finished dimensions
Cabinet · W × D × H1330 × 680 × 2225 mm
Furniture body · W × D × H2840 × 730 × 2225 mm
Fitted overall · W × D × H2890 × 730 × 2275 mm
Desktop · W × D × worktop height1510 × 700 × 750 mm
Desktop thickness40 mm
Floating shelf · W × D × thickness1510 × 300 × 25 mm
Shelf underside above floor1450 mm
Interior and components
Clear hanging height1100 mm
ArrangementWardrobe left; shelves next to the desk on the right
Wall shelfFloating board without visible vertical support boards
Desk storageThree drawers; pedestal on four adjustable feet
FrontsTwo hinged timber doors; 90° opening
Fitting and supplied material
Visible side connections50 mm finished filler at the wardrobe side only. No filler strip beside the desk pedestal.
Supplied wall connectionsOne 100 mm allowance at the wardrobe side, trimmed on site. No pedestal-side filler is supplied.
Supplied overall width3235 mm including untrimmed wall connections and board overlength; not the size shown in 3D.
Upper fascia50 mm finished visible height
Desktop supplied size1805 × 700 × 40 mm, cut to the finished length listed above.
Wall shelf supplied size1805 × 300 × 25 mm, cut to the finished length listed above.
Desk pedestalNo end filler. Desktop and floating shelf retain their listed finished lengths.
Drawing basis
DimensionsAll dimensions are in millimetres. W × D × H means width × depth × height.
RevisionRev H, with the owner-confirmed removal of the desk pedestal end filler on 28 September 2026.
ModelShown at finished dimensions, including the cut wall connections where applicable.
StatusWebsite presentation is not approval for manufacture.

Assigned by house.

Each shared wardrobe is drawn once above. The links below show which designs belong to each room.

House 1.1

House 1.2

House 1.3

House 1.4

House 1.5

House 1.6

House 1.7

House 2.1

House 2.2

House 2.3

House 2.4

House 2.5

House 2.6